AR nano metal antiwear agent is a United States high-tech products. The domestic market only white transparent high-density products.

AR is extracted from natural hydrocarbons, mixed by special procedures, the final production of the activity of single hydrocarbon molecules (10nm). It oil as a carrier, when the metal friction when the temperature reaches 50 ℃, AR is activated. Metal surface to find and fill tiny pores in the metal surface of nanometers (billionths of a meter) level of the protective layer. AR is not an ordinary oil additives, but to really fix the metal anti-wear agent. AR can significantly improve the metal parts inside thesmoothness of the surface of several microns. Through this unique treatment, so that the metal part surface more smooth (near-zero friction).

Q: AR and other oil additives What is the difference?
     A: AR is truly non-flammable pure concentrate. Does not contain Teflon, molybdenum, graphite, zinc, ceramics, metal or other similar products in the commonimpurities. This product and all synthetic oils and petroleum oil, grease, gear lubricants and hydraulic oil compatibility. AR surface of nano-metal high resistance to friction with the present conditioning agent and other additives on the market is fundamentallydifferent from other products on the market today are chemical substances, prone to fall off the car engine there are potential dangers, the most prominent risk Is to plug oil.AR anti-friction metal agent is the world's only fully the physical properties, attached to the metal surface will never fall off, and play a role in cleaning circuit. Currently, theworld's carbon removal methods are based on the "chemical"and the AR is a "physical methods of molecular heat reaction " to clear, is any other product can not be replaced.

Q: AR What are the benefits?

     A: AR 15,000 km to make the engine, no oil change, to extend oil life. Vehicle orequipment to reduce friction and wear of moving parts, can improve the performance ofthe vehicle or equipment to reduce friction between 99.96% (close to zero friction), to improve combustion efficiency, saving gasoline and diesel 5% -25%; reduce exhaustemissions 30% -40%; reduce noise, vibration 30-70%; extend engine life 100%, making it easier cold starting. By the world recognized as the world's most authoritativescientific organizations, anti-wear technology, the most sophisticated energy savingproducts.

Q: Why can reduce emissions?

     Answer: because they can enhance the sealing performance of piston ring and piston, the combustion more complete, more thorough.

Q: Why can play a role in cleaning?

     A: Because the nano-barrier, to isolate and disperse carbon adhesion between the cylinder walls. Molecular oscillations in purely physical way to remove dirt and heatcarbide reaction.

Q: The general number of the vehicle's engine must be added to AR? How long afterjoining can use?

     A: displacement of 1.5 liters of cars, for the first time can add a bottle of 5 Oz,displacement of 1.5 liters or more cars, the first amount is generally 1 bottle of 8 Oz.Add a proportion of 6% of oil, large displacement cars this ratio should be some added.The use of added time after the oil can be extended 1-2 times.

Q: AR can join at any time it? When did the best AR?

     A: AR product is best replaced with new oil and check the fuel filter and add oil flow.Added when the engine temperature must reach 50 ℃. Add 3-5 minutes to start the engine is running. Because AR has a strong cleaning products, old, old vehicles, itscylinder body plastics, carbon deposition will be broken down, so it may appear the phenomenon of black oil, so after adding the vehicle to run in the first 5000-8000 Km oil changes and filter, drain the carbon and impurities, as this will play a more satisfactory results. Every time you only need to travel 10000-15000 km oil change.

Q: The car's engine to join AR What are the benefits? Is it really that good? Vehicle maintenance time was spent

Tens of dollars, plus AR is not worthwhile?

     Answer: A. can guarantee the normal operation of the engine, the engine problemswould be greatly reduced, prolong life doubled.

         B. After the inclusion of friction reduction of AR, the engine is running well, you can save 5% -30% of the fuel.

C. can save more than twice the oil and oil filter (generally vehicles need to replace a5,000 km oil and filter.) After joining AR, driving 10000-15000 kilometers only need to replace oil and filter.

         D. an ordinary car 10000-15000 km just add an AR, extended more than twice theoil change cycle, reduce costs 200-500 yuan; 5% -30% fuel savings, if the average usage of 2000 liters of petrol a year, and its Cost is 14,000 yuan, or at least can save700-1400 yuan; use of AR, not only can make the engine overhaul cycle extended at least more than doubled in each of the direct savings on a car cost (based on different models) of not less than 2,000 yuan More importantly, can extend the life of automobileengines.

Q: The other additives used car, then use the AR affect it?

     A: AR is made of nano-materials, which the additive particles is much smallerReturn Home] [Print] [Go Back]